| The facing panel in a niche of legs of the driver |
| 1. Hook and get a slip, unscrew screws. |
| 2. Turn and get a back clamp, remove the panel. |
| 3. Install the panel upside-down. |
| Overlays of powder |
| 4. Disconnect an aperture sealant, hook a slip and release latches. |
| 5. At installation press a slip before click. |
| Overlay of a rack of a body |
| 6. Disconnect a door sealant, hook and remove a slip. |
| 7. At assembly accurately insert a door sealant. |
| Internal panel of a door |
| 8. See subsection 13.11. |
| Back shelf (sedan) |
| 9. Remove a back armrest. |
| 10. Disconnect two forward plastic latches of a tray of the shelf. |
| 11. Hook behind and remove a shelf tray. |
| 12. If necessary it is possible to remove the shelf assembled for what turn off the lower bolt of a seat belt and pass a belt via the shelf hatch. |
| 13. Establish the shelf upside-down. |
| Internal facing of a luggage carrier (sedan) |
| 14. For removal of the back panel remove a sealant and give the panel up, having disconnected from brackets. |
| 15. The flooring of a luggage carrier fastens plastic clamps. Remove arms of fixing tapes and a plafond then get rugs. |
| 16. Assembly is carried out upside-down. |
| Internal facing of a luggage carrier (compartment and hatchback) |
| 17. Get plastic caps and unscrew 4 screws of fastening of the back panel. |
| 18. The flooring of a luggage carrier is removed as follows. |
| 19. Lift a back part of a flooring. |
|
|
20. Hook and disconnect latches of a back part of a flooring from a body. |
| 21. Assembly is carried out upside-down. |
| Internal panel of a trunk lid (sedan) |
| 22. Hook and disconnect plastic latches, get the panel from brackets in a back part of a cover and remove. |
| 23. Assembly is carried out upside-down. |
| Internal facing of a cargo compartment (hatchback) |
|
|
| 24. Hook and disconnect plastic latches, turn out screws. Carefully give the facing panel a bifurcate stripper, having got the latches hidden under a back part of the panel (a photo at the left) and remove the facing panel (a photo on the right). |