Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
2.1. Specifications
2.2. Service through each 15000 km or 6 months
2.2.1. Replacement of oil and oil filter
2.2.2. Check of turns of idling and quality of mix
2.2.3. Replacement of spark plugs on cars without converter
2.2.4. Check of level of liquid of a hydraulic actuator of brakes
2.2.5. Check of level of liquid in the power steering
2.2.6. Check of level of liquid in automatic transmission
2.2.7. Check of leaks and condition of hoses
2.2.8. Check of level of oil in the manual transmission
2.2.9. Check of a condition of blocks of forward and back brakes.
2.2.10. Check and adjustment of the emergency brake
2.2.11. Check and adjustment of the drive of coupling
2.3. Service through each 30000 km or 12 months
2.4. Service through each 60000 km or 2 years
2.5. Service through each 60000 km or 12 months
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







2-2-9-proverka-sostoyaniya-kolodok-perednikh-i-zadnikh-tormozov.html

2.2.9. Check of a condition of blocks of forward and back brakes.

BLOCKS OF FORWARD BRAKES

PERFORMANCE ORDER
1. Block back wheels, put the car on the emergency brake, then lift the car and establish on supports. Remove forward wheels.
2. Quickly it is possible to check the residual thickness of material of slips on blocks through a window in a support of a forward brake. For more detailed check brake shoes can be removed and cleared. After removal of blocks it is possible to check a condition of brake cylinders of a support and a brake disk (see subsection 11.7 and subsection 11.5).
3. If residual thickness at least of one slip corresponds to standard value or exceeds this value, then replace all four brake shoes in a set.

BLOCKS OF BACK BRAKES

PERFORMANCE ORDER
1. Block forward wheels, lift a back part of the car and establish on supports. Remove back wheels.
2. Quickly it is possible to check the residual thickness of material of slips on blocks through a window in a support of a forward brake. For more detailed check brake shoes can be removed and cleared. After removal of blocks it is possible to check a condition of brake cylinders of a support and a brake disk (see subsection 11.8 and subsection 11.5).
3. If residual thickness at least of one slip corresponds to standard value or exceeds this value, then replace all four brake shoes in a set.


2.2.8. Check of level of oil in the manual transmission

2.2.10. Check and adjustment of the emergency brake