|
1. Turn off a nut (or nuts) and a bolt of fastening of a cover of the air filter (are specified by shooters). |
|
2. Take spring latches of a cover of the air filter to the parties. |
|
3. Remove a cover of the air filter (on a photo – a cover of the air filter of the injector engine). It can be necessary for removal of a cover of the filter to disconnect the air duct case from a cover. |
|
|
4. Get the filtering element, having paid attention to its initial orientation in the filter case (a photo at the left – removal of the filtering element on carburetor engines, a photo on the right – on injector). |
5. Wipe dry the internal surface of the case of the filter with pure rags to remove all traces of dirt. |
6. Insert the new filtering element, it is previously correct it having oriented and having tracked correctness of installation in the filter case. |
|
7. Establish a cover of the air filter and fix by spring latches. Tighten a nut and a bolt. |