Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
3.1. 1,4 and 1,6 liters petrol engine
3.2. 2,0 liters petrol engine
3.2.1. Types of repair of the engine without dismantle from the car
3.2.1.1. Specifications
3.2.1.2. Check of a compression in engine cylinders
3.2.1.3. Order of installation of the piston of the 1st cylinder in compression step VMT
3.2.1.4. Cover of a head of the block of cylinders
3.2.1.5. Crankshaft pulley
3.2.1.6. Cover of the chain drive of cam-shafts
3.2.1.7. Chain of the drive of cam-shafts
3.2.1.8. Natyazhitel of a chain, uspokoitel and asterisks of the drive
3.2.1.9. Cam-shafts
3.2.1.10. Levers of the drive of valves and hydraulic regulators
3.2.1.11. Head of cylinders
3.2.1.12. Oil pallet
3.2.1.13. Oil pump
3.2.1.14. Oil cooler
3.2.1.15. Crankshaft epiploons
3.2.1.16. Flywheel (or drive plate of the hydrotransformer)
3.2.1.17. Details of a suspension bracket of the power unit
3.2.2. Dismantle and capital repairs of the engine
3.3. Diesel engine
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 









3-2-1-vidy-remonta-dvigatelya-bez-demontazha-s-avtomobilya.html

3.2.1. Types of repair of the engine without dismantle from the car

Without removal of the engine from the car it is possible to perform the following works:

  – check of a compression in engine cylinders;
  – a cover of a head of the block of cylinders – removal and installation;
  – a cover of the chain drive of cam-shafts – removal and installation;
  – a chain of the drive of cam-shafts – removal and installation;
  – natyazhitel, uspokoitel and asterisks of cam-shafts – removal and installation;
  – a cam-shaft and levers of the drive of valves – removal, check of a state and installation;
  – a head of the block of cylinders – removal and installation;
  – a head of the block of cylinders and pistons – removal of a deposit;
  – the oil pallet – removal and installation;
  – the oil pump – removal, dismantling and installation;
  – crankshaft epiploons – replacement;
  – details of a suspension bracket of the power unit – check of a state and replacement;
  – a flywheel (a drive plate of the hydrotransformer) – removal, check of a state and installation.



3.2. 2,0 liters petrol engine

3.2.1.1. Specifications