|
4-5-ehlektroventilyator.html
4.5. Electric fan
On all injector engines the fan turns on from the processor control unit, under the influence of temperature sensor which will be screwed in the soaking-up collector (from a cover of chains). On cars with carburetor engines the fan turns on at operation of the thermoswitch which will be screwed in a thermostat cover. On cars with the conditioner and (or) automatic transmission two fans are provided.
Only the elementary check is independently allowed. Check
| PERFORMANCE ORDER |
| 1. Warm up the engine and transfer to idling. |
| 2. The fan has to turn on later no more than in 2 min. (the arrow of the index of temperature has to be on the edge of the red sector). |
| 3. Otherwise stop the engine and disconnect the socket from the fan. |
| 4. If the fan does not turn on at connection 12B directly on a socket conclusion, then the electric motor is faulty. |
| 5. If the fan turns on at direct giving of tension, then conducting, the control unit or the thermoswitch is faulty (a check technique see in subsection 4.6.1). |
| 6. Other checks are carried out in service of car service. |
|
Removal
| PERFORMANCE ORDER |
| 1. Disconnect the battery from weight. |
|
2. Disconnect the socket from the electric motor. |
|
3. Unscrew screws, lift and get the fan assembled with a casing. |
|
Installation
Installation is carried out upside-down.
|
|