Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
6.1. Carburetor engines
6.2. Engines with system of injection of fuel
6.2.1. Specifications
6.2.2. Air filter
6.2.3. Cable of the drive of a butterfly valve
6.2.4. Pedal of management of a butterfly valve
6.2.5. Fuel
6.2.6. System of injection of fuel
6.2.7. Decompression of fuel system
6.2.8. Fuel pump
6.2.9. Fuel level sensor
6.2.10. Fuel tank
6.2.11. System of injection of fuel
6.2.12. Case of a butterfly valve
6.2.13. Units of system of injection of fuel
6.2.14. The soaking-up collector
6.2.15. Final collector
6.2.16. Exhaust system
6.3. System of food / production of the fulfilled gases
6.4. System of decrease in toxicity of the fulfilled gases
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 









6-2-1-tekhnicheskie-dannye.html

6.2.1. Specifications


Conclusions of the sensor of a butterfly valve (on the manual transmission)


Conclusions of the sensor of a butterfly valve (on the automatic transmission)

Detonation sensor conclusions


Type
System of electronic injection of fuel with management from the onboard computer system "Nissan" (ECCS)
Codes of engines with fuel injection
GA14DE (1,4 l) and GA16DE (1,6 l)
Idling turns
Fuel pump
electric, is located in a gasoline tank
Fuel pressure at the regulator exit
about 3,0 bars

Data for checks

Resistance of a winding of the fuel pump,
0,7 Ohm
Resistance of the sensor of provision of a butterfly valve
Between conclusions And yes B or 1 and 2:
  – at full closing of the gate
0,5 kOhm
  – at partial opening of the gate
0,5 – 4 kOhm
  – at full opening of the gate
about 4 kOhm
Nozzle resistance
10 Ohm
Resistance of the perepuskny air valve of stabilization of idling
10 Ohm
Check of a winding of the valve of the proofreader of idling
When giving food of 12 V on conclusions of a winding the click is listened
Sensor of pressure of the hydraulic booster:
  – at turn of a wheel
contacts of the sensor are opened
  – the wheel does not turn
contacts are closed
Resistance of the sensor of cooling liquid:
  – at 20 °C
2,2 – 2,9 Côme
  – at 90 °C
0,24 – 0,26 Côme
  – at 110 °C
0,14 – 0,15 Côme

Only approximate values of resistance are given before recognizing the sensor faulty consult in service of car service.

The recommended gasoline

Cars with catalytic converter
Unleaded gasoline with octane number 95, filling with ethylated gasoline is forbidden

Inhaling moments (N. of m)

Bolts of the case of a butterfly valve:
  – 1st stage
10
  – 2nd stage
20
Fuel distributor bolts:
  – 1st stage
10
  – 2nd stage
24
Bolts and nuts of the soaking-up collector
20
Bolts and nuts of a final collector
21
Fastening of the exhaust system
Nuts of fastening of a reception pipe to a collector
32
Bolt of fastening of a reception pipe to an arm
23
Nuts of fastening of a reception pipe to intermediate section (converter)
49
Bolts of fastening of converter to terminal section
49
Bolts of fastening of intermediate section to terminal
49


6.2. Engines with system of injection of fuel

6.2.2. Air filter