Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
	1. Maintenance instruction
	2. Maintenance
	3. Engines
	4. Cooling system
	5. System of heating and ventilation
	6. Fuel and exhaust system
		6.1. Carburetor engines
		6.2. Engines with system of injection of fuel
		6.3. System of food / production of the fulfilled gases
			6.3.1. Models with single-point electronic injection of fuel
			6.3.2. Models with multipoint electronic injection of fuel
				6.3.2.1. Technical characteristics
				6.3.2.2. Air filter
				6.3.2.3. Accelerator rope
				6.3.2.4. Accelerator pedal
				6.3.2.5. System of injection of fuel
				6.3.2.6. Fuel system
				6.3.2.7. Fuel pump
				6.3.2.8. Fuel level sensor
				6.3.2.9. Fuel tank
				6.3.2.10. Case of a butterfly valve
				6.3.2.11. Elements of system of injection of fuel (1,6 l engines)
				6.3.2.12. Elements of system of injection of fuel (2,0 l engines)
					6.3.2.12.1. Fuel collector and fuel injectors
					6.3.2.12.2. Fuel pressure regulator
					6.3.2.12.3. Potentiometer of a butterfly valve
					6.3.2.12.4. Air stream sensor
					6.3.2.12.5. Additional valve of air supply
					6.3.2.12.6. Electromagnetic valve of bystry operation of the engine
					6.3.2.12.7. Air supply adjustment block (idling mode)
					6.3.2.12.8. Valve of adjustment of intake of air
					6.3.2.12.9. Sensor of an angle of rotation of a bent shaft
					6.3.2.12.10. Power transistor
					6.3.2.12.11. Sensor of detonation combustion of fuel
					6.3.2.12.12. Electronic control unit operation of the engine
					6.3.2.12.13. Switch of neutral transfer
					6.3.2.12.14. Switch of blocking of starters / lamps of a backing
					6.3.2.12.15. Relay of an electronic control unit engines and fuel pump
					6.3.2.12.16. The switch in system of strengthening of steering
					6.3.2.12.17. The switch in the air conditioning system
					6.3.2.12.18. Sensor of speed of the movement of the car
				6.3.2.13. Inlet collector
		6.4. System of decrease in toxicity of the fulfilled gases
	7. System of launch of the engine
	8. Coupling
	9. Transmissions
	10. Half shafts
	11. Brakes
	12. Suspension brackets and steering
	13. Body
	14. Electric equipment

6-3-2-12-ehlementy-sistemy-vpryska-topliva-dvigateli-obemom-2-0-l.html

6.3.2.12. Elements of system of injection of fuel (2,0 l engines)

On cars with the 2,0 liters engine, can determine car model ("Phase I" or "Phase II") by a form of an inlet collector.

On the models "Phase I" the case of a butterfly valve is installed on the basis of an inlet collector, and the collector rises to a head of the block of cylinders up; fuel injectors are located from above an inlet collector and are easily available.

On the models "Phase II" the case of a butterfly valve is installed from above an inlet collector, and the collector falls down to a head of the block of cylinders; fuel injectors are less available.

6.3.2.11.16. Sensor of speed of the movement of the car

6.3.2.12.1. Fuel collector and fuel injectors