Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
6.1. Carburetor engines
6.2. Engines with system of injection of fuel
6.3. System of food / production of the fulfilled gases
6.3.1. Models with single-point electronic injection of fuel
6.3.2. Models with multipoint electronic injection of fuel
6.3.2.1. Technical characteristics
6.3.2.2. Air filter
6.3.2.3. Accelerator rope
6.3.2.4. Accelerator pedal
6.3.2.5. System of injection of fuel
6.3.2.6. Fuel system
6.3.2.7. Fuel pump
6.3.2.8. Fuel level sensor
6.3.2.9. Fuel tank
6.3.2.10. Case of a butterfly valve
6.3.2.11. Elements of system of injection of fuel (1,6 l engines)
6.3.2.12. Elements of system of injection of fuel (2,0 l engines)
6.3.2.13. Inlet collector
6.4. System of decrease in toxicity of the fulfilled gases
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 









6-3-2-4-pedal-akseleratora.html

6.3.2.4. Accelerator pedal

Removal

PERFORMANCE ORDER
1. Remove the lower decorative panel in a niche of legs of the driver.
2. Disconnect a cable from a pedal.
3. Turn off bolts of fastening of an arm and remove a pedal from a partition assembled with an arm.
4. If necessary sort a pedal, having got the forelock, an axis and a spring.
5. Check a condition of details, replace worn-out details.

Installation

PERFORMANCE ORDER
Installation is carried out upside-down. Grease a pedal axis with jellied lubricant. Upon termination of check adjustment of a cable.


6.3.2.3. Accelerator rope

6.3.2.5. System of injection of fuel