Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
2.1. Specifications
2.2. Service through each 15000 km or 6 months
2.3. Service through each 30000 km or 12 months
2.4. Service through each 60000 km or 2 years
2.5. Service through each 60000 km or 12 months
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 









2-1-tekhnicheskie-dannye.html

2.1. Specifications

The recommended lubricants and liquids – see subsection 1.12.7.

Filling capacities (l)
Oil for the engine
3,2
Cooling system:
  – cars from the manual transmission
5,5
  – cars with automatic transmission
5,9

Transmission
Manual transmission, engine of 1,4 l
2,8
Manual transmission, engine of 1,6 l
2,9
All cars with automatic transmission
7,0
Liquid volume in the power steering
1,0
Fuel tank
50
Oil filter
Liquid freezing point in the cooling system:
  – 28% – antifreeze
- 15 °C
  – 50% – antifreeze
- 30 °C

Fuel system
The filtering element of the air filter
Carburetor engines
Champion W247 type
Engines with fuel injection:
  – engine of 1,4 l
Champion type (non-demountable)
  – engine of 1,6 l
Champion U548 type
Fuel filter:
  – carburetor engines
Champion L110 type
  – engines with fuel injection
Champion L215 type
Idling turns:
  – carburetor engines from the manual transmission
750 (± 50) rpm
  – engines with injection of fuel from the manual transmission
700 (± 50) rpm
  – carburetor engines from the automatic transmission
850 (± 50) rpm
  – carburetor engines from the automatic transmission
800 (± 50) rpm
Contents WITH:
  – without converter

1,5 (± 0,5) %

  – with converter

not higher than 0,5% (are not regulated)

System of ignition
Ignition moment (idling)
Carburetor engines
GA14DS (at the disconnected hoses of the vacuum regulator and recirculation)
0 ± 2 to VMT
GA14DS (hoses of the vacuum regulator and recirculation are attached)
10 ± 5 to VMT
GA16DS (at the disconnected hoses of the vacuum regulator and recirculation)
2 ± 2 to VMT
GA16DS (hoses of the vacuum regulator and recirculation are attached)
10 ± 5 to VMT
Engines with fuel injection
10 ± 2 to VMT
Type of spark plugs:
  – carburetor GA16DS engines
Champion RC7YCC4 or RC7YC4 type
  – other engines
Champion RC9YCC4 or RC9YC4 type
Gap between electrodes
1,1 mm

Brakes
Extreme thickness of overlays of disk brakes
2,0 mm
Extreme thickness of overlays of drum brakes
1,5 mm
Deflection of belts of the drive of hinged units (mm):
  – generator and pump of the hydraulic booster
7 – 9, limit – 11
  – the generator without pump of the hydraulic booster
7 – 9, limit – 10
  – conditioner compressor
6 – 8, limit – 9,5
  – pump of the hydraulic booster

4 – 6, limit – 7,5


Prevention

The deflection of a belt is measured at effort of 10 kgfs (see the text), for a new belt value should be reduced by 1 mm.


Inhaling moments (N. of m)

Engine pallet
34
Spark plugs
25
Nut of a roller of a natyazhitel of a belt of the conditioner
28
Drain stopper of the block of cylinders
40
Nuts of wheels
108
Bolts of fastening of seat belts
50
Check point traffic jams:
  – control opening
29
  – drain
29
  – drain stopper of automatic transmission
34


2. Maintenance

2.2. Service through each 15000 km or 6 months