Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
1.1. Control panel
1.2. Alarm lamps
1.3. Arrangement of identification plates
1.4. The AM-UKV radio receiver with electronic control
1.5. The AM-VHF-radio tape recorder with electronic control
1.5.1. Use of the receiver
1.5.2. Control for the station
1.5.3. Control programming
1.5.4. Obtaining road information from the RDS system (radio data)
1.5.5. Adjustment of a timbre
1.5.6. Adjustment of balance
1.6. Catalyst
1.7. Keys
1.8. Ignition switch and lock of ignition
1.9. Handle of management of a screen wiper and washer of a windshield
1.10. The combined switch of driving and passing beam
1.11. Heating of back glass and side mirrors
1.12. Possible malfunctions
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







1-5-3-programmirovanie-nastrojjki.html

1.5.3. Control programming

PERFORMANCE ORDER
1. Press several times the LMU button until on the display there is no designation of the chosen range of L, M or U. You can establish up to six stations in each chosen range (on each pressed button). At installation of the station check those ranges in which the necessary control already is.
2. Be adjusted on the necessary station (see subsection 1.5.2).
3. Press one of buttons of the choice of the station and wait for a sound signal. At the same time the station will automatically join when pressing this button which number will appear on the display. To bring control for the new station in memory, repeat the procedure described above. Control for the programmed station is erased at power off (a battery detachment, burn-out of a safety lock, etc.).


1.5.2. Control for the station

1.5.4. Obtaining road information from the RDS system (radio data)