Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
8.1. Specifications
8.2. Coupling adjustment
8.3. Coupling cable
8.4. Coupling pedal
8.5. Coupling
8.6. Coupling switching off mechanism
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment


8.2. Coupling adjustment

Adjustment of height of a pedal of coupling

H. Pedal height

A. Free wheeling of a pedal of coupling

1. Arm

2. Lock-nut

3. Adjusting bolt

4. Rug

5. Waterproofing

6. Antinoise slip

7. Floor

Adjustment comes down to check and exposure of height and a free wheeling of a pedal.

1. Having removed a rug in the driver's legs, measure distance from a body floor to a pedal.
2. If the distance to a rug is measured, then to result add rug thickness.
3. If the distance differs from standard, then turn off a lock-nut of an adjusting bolt (or the coupling switching off sensor) and rotate a bolt (or the sensor) before receiving the necessary distance.
4. After adjustment tighten a nut with the set moment.
5. For expansion of space remove the lower forward panel.
6. Check a free wheeling of a pedal.
7. Press a pedal a finger and measure distance to feeling of weakness in resistance to movement.
8. In need of adjustment release a cable lock-nut on the coupling switching off fork lever (working in a motor compartment) and rotating a nut with a nakatka, adjust the lever course to norm (2,5–3,5 mm).
9. Again check a free wheeling of a pedal and tighten a lock-nut.
10. Establish all removed details.

8.1. Specifications

8.3. Coupling cable