Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
8.1. Specifications
8.2. Coupling adjustment
8.3. Coupling cable
8.4. Coupling pedal
8.5. Coupling
8.6. Coupling switching off mechanism
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment


8.3. Coupling cable

The lever is in the top part of transmission.


1. Find a cable of coupling and release a lock-nut of a cover of a cable and an adjusting nut with a corrugated wreath.
2. Unhook a cable and get a cable cover from an arm.
3. In salon disconnect a cable from a pedal what it can be necessary for to remove the forward panel.
4. Stretch a cable through a partition of a motor compartment, it is also possible to turn off two bolts of fastening of the holder of a cover and to remove the holder together with a cable.
5. Unbend brackets and get a cable.
6. Check existence on a cable of wear tracks and damages.
7. Check freedom of movement of a cable in a cover. Keep in mind that at installation into place the cable can jam, despite the seeming ease of its movement in completely straightened state.


1. Grease tips of a cable and pass through a partition.
2. Fix the holder of a cover.
3. Dress a cable on a pedal.
4. Lay a cable and fix by brackets.
5. Dress a cable on the lever of a fork and adjust a coupling pedal.

8.2. Coupling adjustment

8.4. Coupling pedal