Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
2.1. Specifications
2.2. Service through each 15000 km or 6 months
2.3. Service through each 30000 km or 12 months
2.4. Service through each 60000 km or 2 years
2.4.1. Replacement of the air filter
2.4.2. Check of system of ignition
2.4.3. Replacement of the filter of ventilation of a case
2.4.4. Check of a hose and control vacuum amplifier
2.4.5. Replacement of cooling liquid
2.4.6. Replacement of transmission liquid in automatic transmission
2.5. Service through each 60000 km or 12 months
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment


2.4.6. Replacement of transmission liquid in automatic transmission

1. Make a short trip to warm liquid up to the working temperature.
2. Park the car on a plain surface, put on the emergency brake and switch off ignition. For expansion of working space lift a forward part of the car and establish on supports.
3. Get the probe of the measuring instrument of level and substitute a vessel of suitable volume under transmission.
4. Turn off a drain stopper in the pallet of transmission and merge liquid in a vessel, having taken measures not to get burn. Carefully clear a stopper of a drain opening, having removed metal particles from magnetic inserts. Laying of a stopper after its otvorachivaniye is subject to replacement.
5. After running off of liquid clear carvings on traffic jams and in the transmission pallet, tighten a drain stopper with the set moment. Lower the car.
6. Fill in liquid through a level measuring instrument branch pipe in the small portions, having inserted a funnel with the thin metal gauze. Before check of level it is necessary to wait a long time that liquid completely flew down. Keep in mind that during check of level of transmission liquid the car has to be on a flat plain surface.
7. After the level of liquid reached point MOVE in the probe, insert the probe into a branch pipe and start the engine. Several minutes of work later idling stop the engine and again check liquid level. If necessary add.
8. Make a short trip that liquid was evenly distributed on the internal volume of transmission, then again check level (see subsection 2.2.6).

2.4.5. Replacement of cooling liquid

2.5. Service through each 60000 km or 12 months