|
7-7-4-raspredelitel-zazhiganiya.html
7.7.4. Ignition distributorRemoval
| PERFORMANCE ORDER |
| 1. Disconnect the battery from weight. |
|
2. Disconnect latches, unscrew screws. |
|
3. Uncover. |
| 4. Remove laying. |
|
5. Disconnect the socket. |
| 6. Disconnect hoses from the vacuum regulator. |
| 7. Designate position of the distributor concerning a head of cylinders. |
|
8. Turn off two bolts and remove the distributor. |
|
Installation
| PERFORMANCE ORDER |
| 1. Replace a sealing ring of a shaft, check a condition of a cover. |
|
2. Insert the distributor, having combined a spline on a shaft with a groove in a nest on a head of cylinders (the arrow specified a sealant). |
|
3. Combine the put tags (shooter) and slightly tighten bolts. |
|
4. Establish laying of a cover. |
|
5. Tighten cover screws. |
| 6. Attach wires and hoses. |
| 7. Check installation of ignition and if necessary adjust, tighten distributor bolts. |
|
|
|