Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
7.1. Specifications
7.2. Battery
7.3. Generator
7.4. System of launch of the engine
7.5. Sensor of emergency pressure of oil
7.6. Starter
7.7. System of ignition
7.7.1. Specifications
7.7.2. Check of system of ignition
7.7.3. Ignition coil
7.7.4. Ignition distributor
7.7.5. Integrated module
7.7.6. Module of the transistor switchboard
7.7.7. Ignition moment
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment


7.7.5. Integrated module

Only for carburetor engines without converter.


1. Remove the distributor.
2. Remove the runner.
Hitachi distributor
3. Apply a tag on that part of the gear core which is turned up.
4. Remove the core, get a pin. If necessary it is possible to remove the runner.
5. Carefully disconnect from the wire module, remembering an order of their arrangement.
6. Unscrew screws and remove the module.
Mitsubishi distributor
7. Uncover the distributor.
8. Disconnect wires, unscrew screws and get the probe.
9. Unscrew screws and remove the integrated module.


1. Installation is carried out upside-down.
2. On the Hitachi distributor check a gap in the induction sensor between the core and the stator which has to be 0,3–0,5 mm.
3. If necessary adjust, having unscrewed screws and having moved the stator.

7.7.4. Ignition distributor

7.7.6. Module of the transistor switchboard