Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
	1. Maintenance instruction
	2. Maintenance
	3. Engines
	4. Cooling system
	5. System of heating and ventilation
	6. Fuel and exhaust system
	7. System of launch of the engine
	8. Coupling
	9. Transmissions
		9.1. Mechanical transmission
		9.2. Automatic transmission
			9.2.1. Specifications
			9.2.2. Cable of management of transmission
			9.2.3. Selector
			9.2.4. A cable of switching to the lowered speed
			9.2.5. Speedometer reducer
			9.2.6. Epiploons
			9.2.7. Double switch of a backing and blocking of a starter
			9.2.8. Overload switch
	10. Half shafts
	11. Brakes
	12. Suspension brackets and steering
	13. Body
	14. Electric equipment

9-2-8-pereklyuchatel-peregruzki.html

9.2.8. Overload switch

Check

PERFORMANCE ORDER

1. Remove the central section of the forward panel.
2. Disconnect wires from the switch of an overload and a control lamp.
	3. Check resistance between conclusions 1 and 2. In the switched-off state between these conclusions there has to be a short circuit.
4. Otherwise replace the switch.

Removal

PERFORMANCE ORDER

1. Remove the central section of the forward panel.

2. Disconnect sockets from the switch of an overload and a control lamp.

3. Unscrew screws, wring out the button and remove the selector handle.

4. Get the switch from latches.

Installation

PERFORMANCE ORDER

1. Install the switch.

2. Correct conducting and dress the handle.

3. Tighten screws and check fixing of the selector.

4. Attach sockets of the switch of an overload and control lamp, establish the central section.