Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
	1. Maintenance instruction
	2. Maintenance
	3. Engines
	4. Cooling system
	5. System of heating and ventilation
	6. Fuel and exhaust system
	7. System of launch of the engine
	8. Coupling
	9. Transmissions
	10. Half shafts
		10.1. Specifications
		10.2. Removal of a half shaft
		10.3. Installation of a half shaft
		10.4. Repair of a half shaft and replacement of protective covers
		10.5. Check of CV JOINTS
		10.6. Bearing of an intermediate support of the right half shaft
	11. Brakes
	12. Suspension brackets and steering
	13. Body
	14. Electric equipment

10-5-proverka-shrusov.html

10.5. Check of CV JOINTS

PERFORMANCE ORDER

1. If when checking (see subsection 2.3.16.2) suspicion on wear of the CV JOINT appears, then arrive as follows.

2. Take off a wheel cap.

3. Take off a cap of a wheel and check a half shaft nut inhaling.

4. If there are indications that the nut is tightened insufficiently, then get the forelock, a lock washer and a pro-rate.

5. Check an inhaling a dynamometer key, establish into place the removed details and a zashplintuyta by the new forelock.

6. Execute these operations on other wheel.

7. Slowly circling with completely turned out wheel, check whether clicks of "metal on metal" from a forward part of the car will appear.

8. Completely turn out a wheel in other party and again listen.

9. If metal clicks sound, then the external hinge of a half shaft is worn-out.

10. If vibrations which amplify at dispersals are listened, then the internal hinge is worn-out.

11. For check of wear of the hinge remove and sort a half shaft and check all side plays and a condition of hinges.

12. The hinge changes only assembled.