Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
3.1. 1,4 and 1,6 liters petrol engine
3.1.1. Types of repair of the engine without dismantle from the car
3.1.2. Dismantle and capital repairs of the engine
3.1.2.1. Specifications
3.1.2.2. Capital repairs of the engine
3.1.2.3. Diagnostics of the engine by means of the vacuum gage
3.1.2.4. The power unit from the manual transmission
3.1.2.5. The power unit with automatic transmission
3.1.2.6. Head of the block of cylinders
3.1.2.7. Head of cylinders and valves
3.1.2.8. Pistons and rods
3.1.2.9. Crankshaft
3.1.2.10. Block of cylinders
3.1.2.11. Conrod and piston group
3.1.2.12. Radical and conrod bearings
3.1.2.13. Piston rings
3.1.2.14. Launch of the engine after capital repairs
3.2. 2,0 liters petrol engine
3.3. Diesel engine
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







3-1-2-demontazh-i-kapitalnyjj-remont-dvigatelya.html

3.1.2. Dismantle and capital repairs of the engine

In given the managements in detail the order of performance of such works as dismantle of the power unit from the car and capital repairs of a head of the block of cylinders, the block of cylinders / case of the crankshaft and other details of the engine is considered.

Advice on preparation and the organization of works on capital repairs and acquisition of spare parts is given, procedures of removal, check of technical condition, repair and installation of knots and details of the engine are in detail described.

Since the following section the description is kept in the assumption that the engine is removed from the car. The description of types of repair without removal of the engine from the car, and also an order of removal and installation of the external knots and units of the engine necessary for performance of capital repairs is provided in appropriate sections.

At the beginning of this subsection all standard data necessary for check of technical condition and capital repairs which procedures are described below are provided.



3.1.1.16. Engine mount details

3.1.2.1. Specifications