Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
4.1. Specifications
4.2. Cooling system hoses
4.3. Radiator
4.4. Thermostat
4.5. Electric fan
4.6. Sensors and switches of the cooling system
4.6.1. The thermoswitch (cars with carburetor engines)
4.6.2. Engine temperature sensor
4.6.3. Sensor of temperature of cooling liquid
4.6.4. Temperature sensor of the conditioner
4.7. Pump of cooling liquid
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 









4-6-3-datchik-temperatury-okhlazhdayushhejj-zhidkosti.html

4.6.3. Sensor of temperature of cooling liquid


The sensor is mounted in a back part of a head of cylinders (from a flywheel).

The sensor represents the thermoresistor fed by the stabilized tension and is switched on in an index chain.

Check

PERFORMANCE ORDER
1. In process of liquid heating current via the sensor increases and the arrow of the index has to deviate to the right. The faulty sensor should be replaced.
2. At incorrect indications of temperature check operation of other devices.
3. If devices do not work, then check a dashboard power-supply circuit.
4. In case of wrong indications of all devices replace the voltage stabilizer (it is mounted on the printed circuit board of the dashboard).
5. If only the index of temperature is faulty, then arrive as follows.
6. In case of the underestimated indications disconnect a wire from the sensor and concern weight.
7. If at the included ignition of the shooter deviates, then the sensor is faulty.
8. If indications do not change, then remove the dashboard (see subsection 14.9) and check conducting from the sensor to the index and index food.
9. If food moves and conducting is correct, then the index is faulty.
10. In case of the overestimated indications disconnect a wire from the sensor.
11. If on the cold engine of the shooter deviates in the left part of a scale, then the sensor is faulty.
12. If indications did not change, then check other part of a chain.

Removal

On some cars for access to the sensor it is required to disconnect or take aside hoses and conducting.

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. On the cooled-down engine merge a part of liquid to thermoswitch level.
3. Disconnect the thermoswitch socket.
4. Carefully turn out the thermoswitch, remove a sealant (if it is provided).

Installation

PERFORMANCE ORDER
1. Clear the thermoswitch and apply sealant on a carving.
2. Replace a sealant (if it is provided).
3. Further assembly is carried out upside-down.


4.6.2. Engine temperature sensor

4.6.4. Temperature sensor of the conditioner