Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
5.1. Details of system of heating and ventilation
5.1.1. Control unit
5.1.2. Regulator cable
5.1.3. Heater
5.1.4. Heater radiator
5.1.5. Fan electric motor
5.1.6. Fan electric motor resistor
5.1.7. Electric motors of air gates
5.2. Conditioner
5.3. Conditioner units
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







5-1-3-otopitel.html

5.1.3. Heater


Prevention

On cars with the conditioner it is forbidden to remove independently the cooling block mounted between the fan and a heater. The procedure of dismantle of a heater demands considerable time, special attention and thorough training.


Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Transfer a heater rychazhok to the provision of NOTES, merge liquid.
3. Disconnect hoses from a heater from a motor compartment (are specified by shooters).
4. Remove a glove box, having unscrewed two screws.
5. Remove the lower and central forward panels (see subsection 13.26).
6. Remove an arm of a glove box.
7. Remove the control unit of a heater.
8. Disconnect an air duct in the right part of a heater, disconnect cables from control levers.
9. Remove the central air duct.
10. Turn off bolts and remove a heater from a partition of a motor compartment.

Installation

PERFORMANCE ORDER
Installation is carried out upside-down. Track correctness of laying of conducting and cables of management, check reliability of fastening of air ducts, install the removed panels and fill in cooling liquid, having removed air.


5.1.2. Regulator cable

5.1.4. Heater radiator