| Glove box |
| 1. Unscrew from below two screws and get a box. |
| 2. Assembly is carried out upside-down. |
| The lower section of the forward panel from the driver |
| 3. Unscrew screws on top and lower edges and remove section from the forward panel. |
| 4. Assembly is carried out upside-down. |
| Middle part of the forward panel with push-button switches |
| 5. Disconnect the battery from weight. |
| 6. Remove a cover from the check point lever |
| 7. Unscrew screws on both parties of the panel, carefully displace forward. |
| 8. Disconnect sockets of switches and remove the panel. |
| 9. If necessary designate routes of plaits that at assembly to lay plaits on former places. |
| 10. Assembly is carried out upside-down. Track that ventilating nozzles entered the corresponding air ducts. |
| Overlays of a steering column |
| 11. Disconnect the battery from weight. |
|
|
| 12. Unscrew from below 6 screws, disconnect the lower slip from the ignition lock (a photo at the left) and give down, having disconnected from latches of the top slip (a photo on the right). |
| 13. Transfer both levers to extreme lower situation and carefully remove the top slip. |
| 14. Assembly is carried out upside-down. |
| Dashboard casing with a ventilating nozzle |
| 15. Remove overlays of a steering column. |
| 16. Turn off two top bolts and incline a column a little. |
|
|
| 17. Unscrew screws of a decorative casing of the dashboard (two at the left, two on the right and one in the bottom of (a photo on the right) and one at the top of (a photo at the left)). |
|
18. Carefully disconnect a casing from the forward panel. If necessary give a column for expansion of space down. |
| 19. Assembly is carried out upside-down. Tighten the top bolts of a column with the set moment. |