Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
13.1. Specifications
13.2. Maintenance
13.3. Small damages of a body
13.4. Large damages of a body
13.5. Front bumper
13.6. Rear bumper
13.7. Cowl
13.8. Cowl lock drive cable
13.9. Cowl lock
13:10. Doors
13:11. Internal panel of a door
13:12. Door lock, switch of the lock and detail of the handle
13:13. Glass of a door and window regulator
13:14. Trunk lid (sedan)
13:15. Cover of a cargo compartment (compartment and hatchback)
13:16. Lock of a trunk lid (sedan)
13:17. Lock of a cover of a cargo compartment and handle
13:18. Details of the central lock
13:19. External glasses
13:20. Windshield, back glass and stationary glasses
13:21. Hatch
13:22. Decorative overlays of a body
13:23. Seats
13:24. Panels of facing of salon
13:25. Average section of the forward panel
13:26. Details of forward facing of salon
14. Electric equipment


13.6. Rear bumper


1. Lift a back part of the car and establish on supports.
Cars sedan and hatchback
2. Unscrew 2 screws of fastening of overlays of a bumper to a back wing (a photo at the left) and the screw of fastening of a slip to an edge of a wheel arch (a photo on the right).
3. Working in a luggage carrier, lift rugs, get caps (a photo at the left) and turn off 2 bolts of fastening of arms of a bumper to the bottom (a photo on the right).
4. Remove a bumper (a photo at the left) and arms (a photo on the right).
5. If necessary the overlay of a bumper can be removed separately, having disconnected latches.
Cars with a compartment body
6. Remove registration plate and an arm.
7. Unscrew screws of fastening of overlays of a bumper on edges of back wheel niches.
8. Get latches and remove the lower part of an overlay of a bumper.
9. From a cargo compartment turn off bolts of fastening of sidewalls of a bumper to wings.

10. From a cargo compartment turn off nuts of fastening of the top part of a bumper to a body.

11. For access to bolts get caps on corners of a cargo compartment.
12. Turn off bolts, put forward a bumper, disconnect the socket of illumination of a sign and remove a bumper.


The bumper is established upside-down.

13.5. Front bumper

13.7. Cowl