Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
13.1. Specifications
13.2. Maintenance
13.3. Small damages of a body
13.4. Large damages of a body
13.5. Front bumper
13.6. Rear bumper
13.7. Cowl
13.8. Cowl lock drive cable
13.9. Cowl lock
13:10. Doors
13:11. Internal panel of a door
13:12. Door lock, switch of the lock and detail of the handle
13:13. Glass of a door and window regulator
13:14. Trunk lid (sedan)
13:15. Cover of a cargo compartment (compartment and hatchback)
13:16. Lock of a trunk lid (sedan)
13:17. Lock of a cover of a cargo compartment and handle
13:18. Details of the central lock
13:19. External glasses
13:20. Windshield, back glass and stationary glasses
13:21. Hatch
13:22. Decorative overlays of a body
13:23. Seats
13:24. Panels of facing of salon
13:25. Average section of the forward panel
13:26. Details of forward facing of salon
14. Electric equipment
 







13-5-perednijj-bamper.html

13.5. Front bumper

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and establish on supports.
2. Turn out screws (a photo at the left) and remove the lower mudguards (a photo on the right).
Cars sedan and hatchback
3. Unscrew screws in wheel niches and disconnect the top part of a bumper from a body.
4. Unscrew screws and disconnect the lower part of a bumper from props.
5. Working under the car, turn off 4 bolts of fastening of arms of a bumper to longerons.
6. On a part of cars disconnect latches which the plastic section of a bumper fastens to the lower forward panel of a body.
7. Disconnect the battery from weight, open sockets of fog lights (if are provided).
8. Remove a bumper (shooter), having pulled on themselves and get arms.
9. If necessary disconnect a plastic overlay of a bumper, having got latches.
Cars with a compartment body
10. Disconnect latches and get panels of protection of wings on both sides.
11. Disconnect latches which the lower part of a spoiler fastens to a body and arms.
12. Turn off bolts of fastening of the top part of a spoiler.
13. Disconnect the battery from weight, open sockets of fog lights.
14. Carefully remove a spoiler from a bumper.
15. From arches of wheels turn off 5 nuts of fastening of a bumper to a forward part of wings.
16. Turn off and get bolts from the top part of a bumper.
17. Remove a bumper.
18. If necessary turn off bolts (working from below under a forward part of a wing) and remove a bumper framework with a buffer slip.

Installation

The bumper is established upside-down.



13.4. Large damages of a body

13.6. Rear bumper





(adsbygoogle = window.adsbygoogle || []).push({});