Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
13.1. Specifications
13.2. Maintenance
13.3. Small damages of a body
13.4. Large damages of a body
13.5. Front bumper
13.6. Rear bumper
13.7. Cowl
13.8. Cowl lock drive cable
13.9. Cowl lock
13:10. Doors
13:11. Internal panel of a door
13:12. Door lock, switch of the lock and detail of the handle
13:13. Glass of a door and window regulator
13:14. Trunk lid (sedan)
13:15. Cover of a cargo compartment (compartment and hatchback)
13:16. Lock of a trunk lid (sedan)
13:17. Lock of a cover of a cargo compartment and handle
13:18. Details of the central lock
13:19. External glasses
13:20. Windshield, back glass and stationary glasses
13:21. Hatch
13:22. Decorative overlays of a body
13:23. Seats
13:24. Panels of facing of salon
13:25. Average section of the forward panel
13:26. Details of forward facing of salon
14. Electric equipment
 







13-16-zamok-kryshki-bagazhnika-sedan.html

13:16. Lock of a trunk lid (sedan)

Removal and installation

PERFORMANCE ORDER
Lock
1. Disconnect latches on a contour of a cover and remove the internal panel.
2. Disconnect latches from a lock cover.
3. Get and take away the socket of the switch of illumination of a luggage carrier in a cover.
4. Turn off two bolts and get the lock from a cover.
5. Take away draft, having turned a key in the lock, and pass the switch socket.
6. Disunite the socket and remove the lock.
7. Put the lock upside-down.
Luggage carrier lock switch
1. Remove the decorative panel.
2. Get a lock ring and disconnect draft of the drive of the lock from the switch.
3. Get a bracket and remove the switch.
Install the switch upside-down. Install the switch upside-down.
Clamp
1. Disconnect a sealant and a slip.
2. Remove an overlay of a rug.
3. Designate the provision of a clamp, turn off two bolts, get a clamp and disconnect a lock drive cable from the lever.
4. Establish a clamp upside-down. before installation of a slip check operation of the lock.


13:15. Cover of a cargo compartment (compartment and hatchback)

13:17. Lock of a cover of a cargo compartment and handle





(adsbygoogle = window.adsbygoogle || []).push({});