Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
13.1. Specifications
13.2. Maintenance
13.3. Small damages of a body
13.4. Large damages of a body
13.5. Front bumper
13.6. Rear bumper
13.7. Cowl
13.8. Cowl lock drive cable
13.9. Cowl lock
13:10. Doors
13:11. Internal panel of a door
13:12. Door lock, switch of the lock and detail of the handle
13:13. Glass of a door and window regulator
13:14. Trunk lid (sedan)
13:15. Cover of a cargo compartment (compartment and hatchback)
13:16. Lock of a trunk lid (sedan)
13:17. Lock of a cover of a cargo compartment and handle
13:18. Details of the central lock
13:19. External glasses
13:20. Windshield, back glass and stationary glasses
13:21. Hatch
13:22. Decorative overlays of a body
13:23. Seats
13:24. Panels of facing of salon
13:25. Average section of the forward panel
13:26. Details of forward facing of salon
14. Electric equipment


13:15. Cover of a cargo compartment (compartment and hatchback)

Removal and installation

1. Lift a cover and record a prop.
2. On cars a compartment and the 5-door hatchback release a lock-nut, turn out a hairpin of the hinge and remove the hinge.
3. On the 3-door hatchback turn off two bolts of an arm.
4. Slightly press a rack and, without allowing to be straightened, remove a rack from a cover.
5. Turn off bolts and disconnect a rack from a body.
6. Establish a rack upside-down.
Cover of a cargo compartment
1. Disconnect the battery from weight.
2. Remove the internal panel of a cover.
3. Disconnect and designate all sockets.
4. Extend sockets and conducting from a cover, having bound for a cord and having got a through sealant. Leave a cord in a cover.
5. Disconnect a hose from a windscreen washer nozzle, get a hose, having bound for a cord.
7. Ask the assistant to hold a cover.
8. Designate the provision of loops concerning a cover.
9. Disconnect a rack from a cover.
10. Turn off bolts and uncover.
11. Establish a cover upside-down.
12. you rotyanit conducting and a hose in a cover, having attached to a cord.
13. Do not tighten bolts of loops.


1. Carefully close a cover and check gaps between a cover and the next panels. The cover is regulated by movement in openings of loops at the released bolts. After adjustment tighten bolts.
2. Check operation of the lock of a cover, if necessary adjust movement at the released bolts which after adjustment tighten.

13:14. Trunk lid (sedan)

13:16. Lock of a trunk lid (sedan)