| Lock |
| 1. Disconnect the battery from weight. |
| 2. Remove internal panels of a cover. |
| 3. Disconnect from the lock of draft of the drive. |
| 4. Disunite the socket of the switch of illumination of a luggage carrier. |
| 5. Turn off two bolts and get the lock through an aperture in a cover. |
| 6. Put the lock upside-down, having tracked correctness of installation of drafts. |
| Switch of the lock of a cover of a cargo compartment |
| 1. Disconnect the battery from weight and remove the internal panel of a cover. |
| 2. Unscrew 4 screws of fastening of a slip with the handle from within. |
| 3. Turn off nuts and release slip latches. |
| 4. Disconnect the socket of illumination of a sign. |
| 5. Disconnect draft from the external handle, remove a slip from the outer side of a cover, get a sealant of wires of a sign from openings in a cover. |
| 6. Disconnect draft from the cover lock. |
|
7. Turn off two nuts (are shown by shooters) and get the lock switch outside of a cover. Remove laying. |
| 8. Install the lock switch upside-down. Replace laying, check correctness of connection of drafts, check operation of the lock. |
| Lock clamp |
| 1. Disconnect latches and remove a back overlay of a cargo compartment. |
| 2. Turn off two bolts and remove a clamp. |
| 3. Establish a clamp upside-down. |
| External handle of a cargo compartment |
| 1. Disconnect the battery from weight and remove the internal panel of a cover. |
| 2. Unscrew 4 screws of fastening of a slip with the handle from within. |
| 3. Turn off nuts and release slip latches. |
| 4. Unscrew two screws and remove the handle. |
| 5. Install the handle upside-down. Check correctness of connection of drafts, check operation of the lock. |