| Lock |
| 1. Disconnect the battery from weight, remove the internal panel of a door. |
|
2. Disconnect draft from the lock (it is shown by shooters). |
|
3. Unscrew screws of fastening of the lock (are shown by shooters). |
| 4. Remove the lock together with the electric drive (if it is provided). |
| 5. The lock is put upside-down. Grease screws with the fixing structure. |
| Switch of the lock and external handle |
| 1. Disconnect the battery from weight, remove the internal panel of a door. |
| 2. Disconnect draft from drive levers. |
|
3. Turn off nuts and get the handle (shooters showed nuts of fastening of the door handle). |
|
4. Disconnect draft from the switch, remove a bracket and get the switch. |
| 5. The switch is installed upside-down. |
| Internal handle |
| 1. Remove a decorative overlay of the handle. |
|
2. Unscrew screws and remove the handle. |
| 3. Disconnect draft from the handle. |
| 4. The handle is installed upside-down. |