| 1. Open a cowl. |
| 2. Carefully displace a forward decorative lattice and get a cable from brackets. |
| 3. Turn off three bolts and remove the lock. |
| 4. Pull for a spring and disconnect a cable from the lock lever. |
| 5. On a part of cars turn out a bracket of fastening of a cable. |
| 6. From salon turn out the screw of the side decorative panel in a niche of legs of the driver. Get a latch and disconnect a sealant from an edge of the panel, get the panel. |
| 7. Unscrew two screws and remove the lever. |
| 8. Get a cable from brackets and extend in a motor compartment. For simplification of assembly it is recommended to fix a rope on the route of a cable. On a part of cars for access to a cable it is required to remove and take aside some details. |
| 9. The cable is established upside-down. Upon termination of check operation of the lock. |