Lever of the emergency brake. Nissan Sunny (from 1991 to 1997 release)
Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
11.1. Specifications
11.2. Hydraulic actuator of brakes
11.3. Tubes and hoses
11.4. Blocks
11.5. Brake disk
11.6. Drums
11.7. Support of a forward brake
11.8. Support of a back brake
11.9. Wheel cylinder
11:10. Main cylinder
11:11. Brake pedal
11:12. Vacuum amplifier of brakes
11:13. Amplifier of brakes and backpressure valve
11:14. Lever of the emergency brake
11:15. Cables of the emergency brake
11:16. Adjustment of the emergency brake
11:17. Braking signal switch
11:18. Switch of a lamp of the emergency brake
11:19. Anti-blocking system
12. Suspension brackets and steering
13. Body
14. Electric equipment


11:14. Lever of the emergency brake


1. Disconnect the battery from weight.
2. Remove the central section of the forward panel (see subsection 13.25).
3. Completely release the emergency brake.
4. Disconnect the socket from the switch of a control lamp.
5. Turn off a nut and disconnect an adjusting bolt from the lever.
6. Previously count quantity of strings of a carving to a nut.
7. Turn off two bolts and remove the lever.


1. The lever is installed upside-down.
2. Turn off a nut on in advance counted number of strings of a carving, check work of a brake and if necessary adjust.
3. Before installation of the panel check serviceability of the switch and a control lamp.

11:13. Amplifier of brakes and backpressure valve

11:15. Cables of the emergency brake