Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
12.1. Specifications
12.2. Bearings of naves of forward wheels
12.3. Rack of a forward suspension bracket
12.4. Lower lever
12.5. Spherical support of the lower lever
12.6. Stabilizer of cross stability of a forward suspension bracket
12.7. Bearings of back wheels
12.8. Details of a back suspension bracket
12.9. Wheel
12:10. Switch of ignition and lock of blocking of a steering column
12:11. Steering column
12:12. Steering mechanism
12:13. Covers of steering transfer
12:14. Hydraulic actuator
12:15. Pump of the hydraulic booster
12:16. Tips of steering draft
13. Body
14. Electric equipment


12:14. Hydraulic actuator

It is necessary to remove air from a hydraulic actuator in case of bubbles in a tank when clicks and the increased noise during the operation of the pump are listened.

At slow turn of a wheel or the rectilinear movement work of a hydraulic actuator is followed by the hissing sound which emergence is not the basis for pumping of a hydraulic actuator.

Removal of air from a hydraulic actuator

1. Lift a forward part of the car and establish on supports.
2. Check and if necessary restore liquid level in a tank.
3. Ask the assistant to rotate a wheel in both parties against the stop and watch liquid level.
4. When falling level add.
5. Repeat these actions until level does not cease to fall. Otherwise in system there is a leak.
6. Start the engine and repeat the procedure.
7. After stabilization of level lower the car.

12:13. Covers of steering transfer

12:15. Pump of the hydraulic booster