Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
12.1. Specifications
12.2. Bearings of naves of forward wheels
12.3. Rack of a forward suspension bracket
12.4. Lower lever
12.5. Spherical support of the lower lever
12.6. Stabilizer of cross stability of a forward suspension bracket
12.7. Bearings of back wheels
12.8. Details of a back suspension bracket
12.9. Wheel
12:10. Switch of ignition and lock of blocking of a steering column
12:11. Steering column
12:12. Steering mechanism
12:13. Covers of steering transfer
12:14. Hydraulic actuator
12:15. Pump of the hydraulic booster
12:16. Tips of steering draft
13. Body
14. Electric equipment


12:16. Tips of steering draft

Removal and installation

1. Lift a forward part of the car and establish on supports.
2. Remove a wheel.
3. Rasshplintuyte also release a nut of steering draft, a vypressuyta the tip hinge, turn off a nut.
4. Release a lock-nut of steering draft.
5. Turn out a draft tip, having counted speed, or designate an initial arrangement of a tip of draft (the tag is specified by an arrow).
6. Clear carvings of draft and a tip.
7. Replace a tip if the cover is damaged, in a finger of the hinge there is a noticeable side play, or the finger jams in the hinge and also if the tip carving is damaged.
8. Wrap a tip on the counted speed.
9. Clear a conical part of a finger attach a tip to a rotary fist.
10. Tighten a nut with the set moment.
11. Tighten a nut before combination of cuts of a nut with openings in a finger and a zashplintuyta.
12. Establish a wheel and lower the car.
13. Check the angles of installation of forward wheels and tighten a lock-nut.

12:15. Pump of the hydraulic booster

13. Body

(adsbygoogle = window.adsbygoogle || []).push({});