Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
12.1. Specifications
12.2. Bearings of naves of forward wheels
12.3. Rack of a forward suspension bracket
12.4. Lower lever
12.5. Spherical support of the lower lever
12.6. Stabilizer of cross stability of a forward suspension bracket
12.7. Bearings of back wheels
12.8. Details of a back suspension bracket
12.9. Wheel
12:10. Switch of ignition and lock of blocking of a steering column
12:11. Steering column
12:12. Steering mechanism
12:13. Covers of steering transfer
12:14. Hydraulic actuator
12:15. Pump of the hydraulic booster
12:16. Tips of steering draft
13. Body
14. Electric equipment
 






На http://доступнаясред𚋿.рф лестничный подъемник инвалидов купить.



12-9-rul.html

12.9. Wheel


Prevention

The present description does not belong to cars with a safety cushion.


Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Expose wheels in the provision of driving on a straight line.
3. On a wheel with 2 spokes remove the central slip, remove the panel of a sound signal, having disconnected latches the screw-driver inserted between a wheel and the panel.
4. On a wheel with 3 spokes disconnect a collar the screw-driver inserted into deepening of the lower spoke.
5. Carefully hook the central slip for bottom edge, disconnect other latches and remove a slip.
6. On a wheel with 4 spokes release screws in the basis of a nave and remove a slip.
7. Disconnect wires of a sound signal.
8. Unscrew the wire arm screw (on a part of cars).
9. Designate the provision of a wheel on a shaft (the arrow specified a tag of provision of a wheel on a shaft).
10. Turn off a nut.
11. Remove a wheel from shaft shlits, having turned in the parties and having pulled on itself, or a stripper.

Installation

PERFORMANCE ORDER
1. Grease surfaces of details of an automatic otklyuchatel of the index of turn and a contact ring of a sound signal.
2. The wheel is established upside-down.
3. Previously be convinced that the automatic otklyuchatel is on average situation, otherwise breakage of the switch of turns is possible.
4. If necessary establish a wheel so that spokes were symmetrized concerning the car.


12.8.5. Stabilizer of cross stability of a back suspension bracket

12:10. Switch of ignition and lock of blocking of a steering column