The antenna which is built in in back glass |
1. Such antenna is installed on a part of cars and is combined with a glass heater. In case of suspicion on malfunction address to service of car service. |
The antenna mounted on a back wing |
2. Disconnect the battery from weight. |
3. Remove a luggage carrier rug. |
4. Get latches and remove an overlay of a rug. |
5. Disconnect the socket from the antenna electric drive through an aperture in the body panel. |
6. Disconnect antennas from a body. |
7. Disconnect a wire from the antenna, get from a bracket a wire on weight. |
|
8. Turn off a nut of fastening of a mast of the antenna. |
9. Unscrew two screws of fastening of the antenna to a body. |
10. Get the antenna and disconnect a drainage hose. |
11. Install the antenna upside-down. Tighten screws only after tightening of a nut of a mast. |
The antenna mounted on a roof |
12. Unscrew outside two screws, get the antenna and disconnect a wire. |
13. Install the antenna upside-down. |
The antenna in the top part of a windshield |
14. Unscrew outside two screws, get the antenna and disconnect a wire. |
15. Install the antenna upside-down. Densely tighten screws. |