Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
14.1. Specifications
14.2. Detection of malfunctions
14.3. Safety locks and relay
14.4. Switches
14.5. Lamps of external lighting
14.6. Lamps of internal lighting
14.7. Devices of external lighting
14.8. Adjustment of headlights
14.9. Dashboard
14:10. Sound signal
14:11. Speedometer drive cable
14:12. Lever of brushes of a screen wiper
14:13. Electric drive of screenwash
14:14. Electric drive of a cleaner of back glass
14:15. Details of screen wipers
14:16. Radio tape recorder
14:17. Loudspeakers
14:18. Antenna
14:19. Security system pillows
14:20. Schemes of electric equipment
 







14-7-pribory-naruzhnogo-osveshheniya.html

14.7. Devices of external lighting


Prevention

At removal of any light device disconnect the battery from weight.


Removal and installation

PERFORMANCE ORDER
Headlights (sedan and hatchback)
1. Remove a plafond of the index of turns.
2. Remove a forward lattice.
3. Disconnect sockets.
4. Unscrew two side screws.
5. Turn off two back nuts.
6. Get a headlight.
7. Installation is carried out upside-down. Believe reliability of fastening of installation of the lower hinge Believe adjustment of headlights (see subsection 14.8).
Plafond of the forward index of turn
8. See subsection 14.5 (on a photo the socket of the forward index of turn is shown).
Plafond of the forward repeater of turn
9. See subsection 14.5.
Forward fog lights
10. See subsection 14.5.
Searchlight
11. See subsection 14.5.
Block of back lamps
12. Remove the holder of lamps.
13. Turn off four nuts (a photo at the left), remove an arm (a photo on the right).
14. Get the block of back lamps. The block fastens sticky sealant.
15. Clear the block of lamps and an edge of an aperture of a body of the sealant remains.
16. Apply sealant on an edge of the block of lamps.
17. Install the block of lamps upside-down.


14.6. Lamps of internal lighting

14.8. Adjustment of headlights





(adsbygoogle = window.adsbygoogle || []).push({});