| Headlights |
| 1. Open a cowl |
|
|
2. Press latches and disconnect the socket. |
| 3. Uncover, having turned counterclockwise. |
| 4. Remove a rubber cover. |
| 5. Get the holder of a lamp, having pressed on a latch. |
|
6. Get a lamp. |
| 7. You hold a new lamp only through a pure napkin, without touching by fingers. |
| 8. Establish a new lamp so. that the ledge of the holder came into dredging in the headlight case. Dress a cover an inscription up and attach the socket. |
| Dimensional lamp |
| 1. Open a cowl |
|
2. Press latches and disconnect the socket. |
| 3. Get the holder of a lamp, having turned counterclockwise. |
| 4. Get a lamp from the holder. |
| 5. Insert a new lamp and establish upside-down. |
| Index of turn |
|
1. Open a cowl and unscrew screws of a plafond of the index of turn in its top external part. |
|
2. Disconnect the lower hinge and hook and carefully get a plafond from a wing. |
|
3. Get the holder of a lamp, having turned counterclockwise. |
|
4. The lamp fastens in the holder bayonetny connection. |
|
5. Establish a new lamp upside-down. At installation track that the ledge on a plafond came into a body opening. |
| Repeater of turns |
| 1. Displace a plafond forward and disconnect from the wing panel. |
| 2. Get a plafond, turn out the holder counterclockwise. |
| 3. Get a lamp, having pulled from the holder. |
| 4. Establish a new lamp upside-down. |
| Searchlight |
| 1. Unscrew two screws of fastening of a searchlight, do not touch adjusting screws. |
| 2. Get a searchlight, remove a back cover, having turned counterclockwise. |
| 3. Get a lock ring and a lamp, disconnect the socket. |
| 4. Undertake a lamp only through a pure napkin. |
| 5. Insert a new lamp, having combined a ledge and dredging in a plafond. |
| 6. Fix a lamp by a lock ring, attach the socket. |
| 7. Wrap a cover, establish a plafond and wrap screws. |
| Forward fog lights |
| 1. Unscrew two screws, do not touch screws of adjustment of a bunch. |
| 2. Disconnect the socket, get a lock ring and a lamp. |
| 3. Establish a lamp upside-down. |
| Back combination of lamps |
| 1. Open a trunk lid (a cargo compartment). |
| 2. Get a latch and open the hatch in a back slip. |
|
3. Get the holder of lamps. |
|
4. Lamps fasten in the holder bayonetny connection. |
| 5. Replace a lamp and establish the holder upside-down. On a braking signal lamp / a dimensional lamp adjusting lugs are provided. |
| Lighting lamp of registration plate |
| 1. Unscrew two screws and get a plafond from a back cover. |
| 2. Pull and get a lamp. |
|
3. Establish a new lamp upside-down. |