Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
6.1. Carburetor engines
6.1.1. Specifications
6.1.2. Air filter
6.1.3. Air stream temperature regulator
6.1.4. Fuel pump
6.1.5. Fuel level sensor
6.1.6. Fuel tank
6.1.7. Cable of the drive of a butterfly valve
6.1.8. Pedal of management of a butterfly valve
6.1.9. Fuel
6.1.10. Carburetor
6.1.11. Sensors and valves of the carburetor
6.1.12. The soaking-up collector
6.1.13. Final collector
6.1.14. Exhaust system
6.2. Engines with system of injection of fuel
6.3. System of food / production of the fulfilled gases
6.4. System of decrease in toxicity of the fulfilled gases
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment


6.1.13. Final collector

Final collector on cars with converter

1. Hose of selection of hot air

2. Recirculation tube

3. Socket of the sensor of exhaust gases

4. Tube of selection of exhaust gases


1. Disconnect from a collector and remove a hose.
2. On cars with converter disconnect wires of the sensor of exhaust gases.
3. Turn off the union and disconnect all tubes from a collector.
4. Turn off bolts and remove a collector casing.
5. Include on the emergency brake and lift a forward part of the car.
6. Turn off nuts and a bolt and remove a reception exhaust pipe, remove laying.
7. Turn off nuts and bolts of fastening of a final collector to a head of the block of cylinders, remove a collector from hairpins, remove laying.


1. Installation is carried out upside-down.
2. Before assembly replace all laying, having carefully cleared the demountable planes, replace or restore the damaged hairpins.
3. Tighten bolts and nuts a dynamometer key.

6.1.12. The soaking-up collector

6.1.14. Exhaust system