Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
6.1. Carburetor engines
6.1.1. Specifications
6.1.2. Air filter
6.1.3. Air stream temperature regulator
6.1.4. Fuel pump
6.1.5. Fuel level sensor
6.1.6. Fuel tank
6.1.7. Cable of the drive of a butterfly valve
6.1.8. Pedal of management of a butterfly valve
6.1.9. Fuel
6.1.10. Carburetor
6.1.11. Sensors and valves of the carburetor
6.1.12. The soaking-up collector
6.1.13. Final collector
6.1.14. Exhaust system
6.2. Engines with system of injection of fuel
6.3. System of food / production of the fulfilled gases
6.4. System of decrease in toxicity of the fulfilled gases
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment


6.1.5. Fuel level sensor


1. Disconnect the battery from weight.
2. Remove a back of a back seat (see subsection 13.23).
3. Remove the viewing hatch.
4. Disconnect the socket from the sensor and immediately attach a tape to a body.
5. Designate hoses and disconnect. Immediately attach them a tape to a body.
6. Find tags of position of the sensor, in the absence of tags put.
7. Turn off a cap nut, slightly striking the screw-driver rested against nut teeth.
8. Carefully lift the sensor, disconnect the filter from a tank and get the sensor assembled with the filter.
9. Remove laying.
10. Wash out the filter and attentively examine. At a contamination or damages replace the filter.


Installation is carried out upside-down. Replace a sealing ring of a tank, reliably fix the filter on the sensor, combine tags on the sensor and a tank.

6.1.4. Fuel pump

6.1.6. Fuel tank