Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
6.1. Carburetor engines
6.1.1. Specifications
6.1.2. Air filter
6.1.3. Air stream temperature regulator
6.1.4. Fuel pump
6.1.5. Fuel level sensor
6.1.6. Fuel tank
6.1.7. Cable of the drive of a butterfly valve
6.1.8. Pedal of management of a butterfly valve
6.1.9. Fuel
6.1.10. Carburetor
6.1.11. Sensors and valves of the carburetor
6.1.12. The soaking-up collector
6.1.13. Final collector
6.1.14. Exhaust system
6.2. Engines with system of injection of fuel
6.3. System of food / production of the fulfilled gases
6.4. System of decrease in toxicity of the fulfilled gases
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment


6.1.6. Fuel tank


1. Before removal of the fuel tank merge as much as possible gasoline. It is desirable to devastate a tank a trip as the drain stopper is not provided.
2. Disconnect the battery from weight.
3. Lift a back part of the car and establish on supports.
4. Disconnect a jellied mouth from a body.
5. Disconnect fuel hoses.
6. Substitute a support under a tank (it is desirable the cart with a jack).
7. Turn off bolts of a forward thermal guard (if it is provided).
8. Disconnect the socket from the fuel sensor.
9. Turn off bolts of fastening of a tank.
10. Slowly lower a tank, disconnecting ventilating tubes in process of access.
11. Remove a tank, designate and remove rubber pillows.
12. Wash out a tank and examine.
13. The tank is integral, it is made of plastic therefore at detection of damages it should be replaced.


1. Installation is carried out upside-down.
2. Check correctness of laying of all hoses, track that there were no perezhatiya.
3. Before a trip be convinced of lack of a leak of fuel.

6.1.5. Fuel level sensor

6.1.7. Cable of the drive of a butterfly valve