Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
6.1. Carburetor engines
6.1.1. Specifications
6.1.2. Air filter
6.1.3. Air stream temperature regulator
6.1.4. Fuel pump
6.1.5. Fuel level sensor
6.1.6. Fuel tank
6.1.7. Cable of the drive of a butterfly valve
6.1.8. Pedal of management of a butterfly valve
6.1.9. Fuel
6.1.10. Carburetor
6.1.11. Sensors and valves of the carburetor
6.1.12. The soaking-up collector
6.1.13. Final collector
6.1.14. Exhaust system
6.2. Engines with system of injection of fuel
6.3. System of food / production of the fulfilled gases
6.4. System of decrease in toxicity of the fulfilled gases
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment


6.1.4. Fuel pump

Arrangement of the fuel pump

The fuel pump is located in the left part of a head of cylinders.


1. For check of productivity of the pump without its removal disconnect a hose of supply of fuel to the carburetor and ask the assistant to turn the engine a starter. From a hose strong regular emissions of fuel have to be observed.
2. If the pump is removed, then muffle the output union a tampon (not to disconnect an entrance hose) and press the fuel pumping lever.
3. The lever has to move smoothly in both directions and from the union fuel emissions have to be observed.


1. Disconnect hoses from the pump and muffle (it can be necessary for access to remove the air filter).
2. Turn off bolts and remove the pump together with a pro-rate.


1. Clear the planes, establish a new pro-rate and the pump, tighten bolts.
2. Attach hoses, fix by collars.

6.1.3. Air stream temperature regulator

6.1.5. Fuel level sensor