Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
3.1. 1,4 and 1,6 liters petrol engine
3.1.1. Types of repair of the engine without dismantle from the car
3.1.1.1. Specifications
3.1.1.2. Compression
3.1.1.3. Order of installation of the piston of the 1st cylinder in compression step VMT
3.1.1.4. Cover of a head of the block of cylinders
3.1.1.5. Crankshaft pulley
3.1.1.6. Cover of the chain drive of cam-shafts
3.1.1.7. Chains of the drive of cam-shafts
3.1.1.8. Natyazhiteli and uspokoitel of a chain, drive asterisk
3.1.1.9. Gaps in the mechanism of the drive of valves
3.1.1.10. Cam-shafts and pushers
3.1.1.11. Head of the block of cylinders
3.1.1.12. Oil pallet
3.1.1.13. Oil pump
3.1.1.14. Crankshaft epiploons
3.1.1.15. Flywheel
3.1.1.16. Engine mount details
3.1.2. Dismantle and capital repairs of the engine
3.2. 2,0 liters petrol engine
3.3. Diesel engine
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 









3-1-1-14-salniki-kolenvala.html

3.1.1.14. Crankshaft epiploons

Replacement

RIGHT EPIPLOON (EPIPLOON OF THE FORWARD COVER)

PERFORMANCE ORDER
1. Remove a crankshaft pulley.
2. Carefully take an epiploon, having hooked the screw-driver.
3. Clear the case of an epiploon and remove all agnails and sharp edges.
4. Grease and carefully press a new epiploon against the stop in the fillet provided on an external surface.
5. Remove the lubricant remains, then establish a crankshaft pulley.

BACK EPIPLOON (FLYWHEEL EPIPLOON)

PERFORMANCE ORDER
1. Remove a flywheel (see subsection 3.1.1.15).
2. Hook an epiploon and carefully take from the block of cylinders.
3. Clear the epiploon case.
4. Grease working edges of a new epiploon and the condensed crankshaft neck with a thin layer of jellied lubricant, correctly orient an epiploon concerning a crankshaft case.
5. Carefully dress an epiploon on the crankshaft and press without distortions so that the surface of an epiploon was aflush with a fillet on the block of cylinders.
6. Remove the lubricant remains, establish a flywheel.


3.1.1.13. Oil pump

3.1.1.15. Flywheel