Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
	1. Maintenance instruction
	2. Maintenance
	3. Engines
		3.1. 1,4 and 1,6 liters petrol engine
			3.1.1. Types of repair of the engine without dismantle from the car
				3.1.1.1. Specifications
				3.1.1.2. Compression
				3.1.1.3. Order of installation of the piston of the 1st cylinder in compression step VMT
				3.1.1.4. Cover of a head of the block of cylinders
				3.1.1.5. Crankshaft pulley
				3.1.1.6. Cover of the chain drive of cam-shafts
				3.1.1.7. Chains of the drive of cam-shafts
				3.1.1.8. Natyazhiteli and uspokoitel of a chain, drive asterisk
				3.1.1.9. Gaps in the mechanism of the drive of valves
				3.1.1.10. Cam-shafts and pushers
				3.1.1.11. Head of the block of cylinders
				3.1.1.12. Oil pallet
				3.1.1.13. Oil pump
				3.1.1.14. Crankshaft epiploons
				3.1.1.15. Flywheel
				3.1.1.16. Engine mount details
			3.1.2. Dismantle and capital repairs of the engine
		3.2. 2,0 liters petrol engine
		3.3. Diesel engine
	4. Cooling system
	5. System of heating and ventilation
	6. Fuel and exhaust system
	7. System of launch of the engine
	8. Coupling
	9. Transmissions
	10. Half shafts
	11. Brakes
	12. Suspension brackets and steering
	13. Body
	14. Electric equipment

3-1-1-5-shkiv-kolenvala.html

3.1.1.5. Crankshaft pulley

Removal

PERFORMANCE ORDER

1. Take off auxiliary belts of the drive.
2. If necessary expose the piston of the 1st cylinder in compression step VMT.
3. To exclude turn of the crankshaft at an otvorachivaniye of a bolt of a pulley include the highest transfer and ask the assistant to press a brake pedal to the full. If the bolt turns away on the removed engine, then record a flywheel adaptation (cm. subsection 3.1.1.15).
	4. Turn off a bolt and remove a pulley from the crankshaft. If the spline of a pulley has free landing, then remove a spline and you store together with a pulley.

Installation

PERFORMANCE ORDER

1. Establish a spline (if acted).
2. Combine a pulley flute with a spline, dress a pulley on the crankshaft and wrap a bolt with a washer.
	3. Fix the crankshaft from a provorachivaniye and tighten a bolt with the set moment.
4. Put on belts and adjust a tension.