Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
3.1. 1,4 and 1,6 liters petrol engine
3.2. 2,0 liters petrol engine
3.3. Diesel engine
3.3.1. Technical characteristics
3.3.2. Gear belt
3.3.3. Replacement of laying of a head of cylinders
3.3.4. Valves
3.3.5. Replacement of maslootrazhatelny caps of a core of the valve
3.3.6. Check of the directing valves
3.3.7. Grinding in of a saddle of the valve
3.3.8. Processing of a head of cylinders / valves
3.3.9. Check / adjustment of gaps of valves
3.3.10. Check of a compression
3.3.11. Maple belt
3.3.12. Malfunctions of the engine
3.3.13. Engine lubrication system
3.3.14. Oil contour
3.3.15. Removal and installation of the pallet of a case
3.3.16. Oil pump
3.3.17. Cooling system
3.3.18. Injection device
3.3.19. Spark plugs
3.3.20. Power supply system
3.3.21. Check / replacement of the valve of interruption in supply of fuel
3.3.22. Speed of idling and maximum speed
3.3.23. Nozzles
3.3.24. Beginning of giving of the fuel pump of high pressure
3.3.25. Operation during the winter period
3.3.26. Specifications of a power supply system of the diesel
3.3.27. Useful tips for owners of the diesel car
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







3-3-20-sistema-pitaniya.html

3.3.20. Power supply system


Power supply system elements

1. Emergency brake
2. Fuel filter
3. Drain crane
4. TNVD
5. Perepuskna valve
6. Shtekerny connection of the valve of interruption in supply of fuel
7. System of cold start
8. Valve of management of fuel return
9. Damper
10. Pipeline

Treat a power supply system: the fuel tank, fuel-supply lines, the fuel pump of high pressure (FPHP) with nozzles and the fuel filter. The current reserve of fuel is reflected in the index of level of fuel. The fuel tank is equipped with system of ventilation. If the fuel tank is empty of a power supply system it is necessary to remove air.


Prevention

To check at complicated a starter whether fuel to injection gates moves, it is necessary to weaken cap nuts on two gates and to start the engine without preliminary heat until fuel acts on cap nuts. Tighten cap nuts and start the engine according to the instruction.


PERFORMANCE ORDER
1. If fuel does not give in, it is necessary to remove air from system following in the way.
2. Fill TNVD with diesel fuel.
3. Fill with fuel the fuel filter.
4. Tow the car.
5. Thanks to these measures bystry removal of air from system is reached.
6. During the works with a power supply system follow rules of purity.
7. Besides, you watch that diesel fuel did not flow on hoses of cooling liquid.
8. If necessary hoses should be cleared at once.
9. The corroded hoses should be replaced.


3.3.19. Spark plugs

3.3.21. Check / replacement of the valve of interruption in supply of fuel