Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
3.1. 1,4 and 1,6 liters petrol engine
3.2. 2,0 liters petrol engine
3.3. Diesel engine
3.3.1. Technical characteristics
3.3.2. Gear belt
3.3.3. Replacement of laying of a head of cylinders
3.3.4. Valves
3.3.5. Replacement of maslootrazhatelny caps of a core of the valve
3.3.6. Check of the directing valves
3.3.7. Grinding in of a saddle of the valve
3.3.8. Processing of a head of cylinders / valves
3.3.9. Check / adjustment of gaps of valves
3.3.10. Check of a compression
3.3.11. Maple belt
3.3.12. Malfunctions of the engine
3.3.13. Engine lubrication system
3.3.14. Oil contour
3.3.15. Removal and installation of the pallet of a case
3.3.16. Oil pump
3.3.17. Cooling system
3.3.18. Injection device
3.3.19. Spark plugs
3.3.20. Power supply system
3.3.21. Check / replacement of the valve of interruption in supply of fuel
3.3.22. Speed of idling and maximum speed
3.3.23. Nozzles
3.3.24. Beginning of giving of the fuel pump of high pressure
3.3.25. Operation during the winter period
3.3.26. Specifications of a power supply system of the diesel
3.3.27. Useful tips for owners of the diesel car
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







3-3-7-pritirka-sedla-klapana.html

3.3.7. Grinding in of a saddle of the valve

The processed saddle and the new valve have to be ground in to each other to provide the maximum consolidation.

Valves should be ground in only with small grinding paste. For necessary rotation on a plate of the valve the rubber sucker is established. Formation of grooves will be possible to avoid thanks to a frequent pripodnimaniye and further uniform rotation of the valve during grinding in process in different directions.


Prevention

After grinding in it is necessary to delete grinding paste carefully.


The working surface can check process of grinding in by the form or by means of fuel.

PERFORMANCE ORDER
Insert the valve, fill the combustion chamber with gasoline, fuel should not follow from a valve guide, otherwise repeat grinding in.


3.3.6. Check of the directing valves

3.3.8. Processing of a head of cylinders / valves