6-3-1-8-toplivnyjj-nasos.html
6.3.1.8. Fuel pump
Prevention
You watch precautionary measures in subsection 6.3.1 before work.
Removal
The pump is removed together with the fuel level sensor.
PERFORMANCE ORDER |
1. Remove the sensor, being guided by the instructions provided in subsection 6.3.1.9. |
2. If it is necessary, remove the filtering element from the basis of the fuel pump, then, release fixing clips and remove plastic casings from the fuel pump. |
3. Wash out the fuel filter in solution with high temperature of ignition. |
4. Examine the filter on existence of traces of a contamination or cracks, and replace it if it is necessary. |
|
Installation
PERFORMANCE ORDER |
1. If it is necessary, install plastic casings on the pump and install the filter. |
2. Check that casings were reliably established on the pump, then, install the fuel level sensor on the pump and establish it, being guided by the instructions provided in subsection 6.3.1.9. |
|
|
|