Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
6.1. Carburetor engines
6.2. Engines with system of injection of fuel
6.3. System of food / production of the fulfilled gases
6.3.1. Models with single-point electronic injection of fuel
6.3.1.1. Technical characteristics
6.3.1.2. Air filter
6.3.1.3. Accelerator rope
6.3.1.4. Accelerator pedal
6.3.1.5. The gasoline which is not containing tetraethyllead
6.3.1.6. System of injection of fuel
6.3.1.7. Fuel system
6.3.1.8. Fuel pump
6.3.1.9. Fuel level sensor
6.3.1.10. Fuel tank
6.3.1.11. Case of a butterfly valve
6.3.1.12. System of injection of fuel / ignition
6.3.1.13. Elements of system of injection of fuel
6.3.1.14. Inlet collector
6.3.2. Models with multipoint electronic injection of fuel
6.4. System of decrease in toxicity of the fulfilled gases
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 









6-3-1-1-tekhnicheskie-kharakteristiki.html

6.3.1.1. Technical characteristics


I will corrode connections of a potentiometer of a butterfly valve


I will corrode connections of the case of a butterfly valve


I will corrode connections of the sensor of detonation combustion of fuel


System type
Electronic single-point system of injection of Nissan fuel
Application
Models with the 2,0 liters engine, a SR20Di engine code

Technical characteristics of a power supply system

Idling turns see in subsection 2.1. Characteristics of fuel mix are provided in subsection 6.1.1 and in subsection 6.2.1.

Type of the fuel pump
Electric, is established in the fuel tank
Pressure of the fuel pump (approximately)
2,5 Bar

Control data of elements of a power supply system

Resistance of the fuel pump (the tester is connected to the fuel level sensor)
0,7 Ohm
Resistance of a potentiometer of a butterfly valve (see rice. I will corrode connections of a potentiometer of a butterfly valve)
The tester is connected between plugs "A" and "B":
  – the butterfly valve is closed
1 kOhm
  – the butterfly valve is partially open
1 – 9 kOhm
  – the butterfly valve is completely open
9 kOhm
Injector resistance (see rice. I will corrode connections of the case of a butterfly valve):
  – the tester is connected between the plugs "A" and "D"
1 – 2 Ohms
Resistance of the additional valve of air supply (see rice. I will corrode connections of the case of a butterfly valve):
  – the tester is connected between plugs "B" and "E"
10 Ohm
The electromagnetic valve of increase in speed of operation of the cold engine in the idling mode (see rice. I will corrode connections of the case of a butterfly valve):
  – when giving tension in 12 Volts between plugs "C" (+) and "F" (-)
The electromagnetic valve has to publish click that demonstrates its correct work
The sensor of detonation combustion of fuel (see rice. I will corrode connections of the sensor of denotational combustion of fuel):
  – the tester is connected between the plug "A" and (the mass of the car)
The sensor has to carry current
  – heater of fuel mix
The heater has to carry current
Membrane switch of system of strengthening of steering:
At rotation of a steering wheel
The switch closes a chain
Steering wheel not movably
The switch disconnects a chain
Resistance of the sensor of temperature of cooling liquid:
  – at a temperature of cooling liquid of 20 °C
2,1 – 2,9 kOhm
  – at 50 °C
0,68 – 1 whom
  – at 80 °C
0,30 – 0,33 whom
All given values of resistance are approximate. Before considering any element failed, consult with experts.

The recommended fuel

Models without catalytic converter (non-catalyst model)
AI-95 without the content of tetraethyllead or AI-97 with the content of tetraethyllead
Models with the catalytic converter (catalyst model)
AI-95 without the content of tetraethyllead. Gasoline with the content of tetraethyllead is forbidden to be used

Moments of an inhaling of threaded connections, N. of m.

Fixing nut of a damper of a butterfly valve
29
Bolt of fastening of the sensor of detonation combustion of fuel
24
Fixing bolts of the case of a butterfly valve:
  – stage 1
10
  – stage 2
20
Nuts and bolts of fastening of an inlet collector
20
Nuts and bolts of fastening of a final collector
43
Fastenings of the exhaust system
Nut of fastening of a reception pipe to a final collector
45
Fixing bolt of a reception pipe
23
Nuts of fastening of a reception pipe to an intermediate pipe / to the catalytic converter
49
Bolts of fastening of the catalytic converter to a muffler pipe
49
Bolts of fastening of an intermediate pipe to a muffler pipe
49


6.3.1. Models with single-point electronic injection of fuel

6.3.1.2. Air filter