| 1. The operating electromagnetic valve is installed on the left side of an inlet collector. |
| 2. For replacement of the electromagnetic valve disconnect a wire of the negative plug of the accumulator. Then, squeeze a fixing clip and disconnect the socket of connection of the valve. |
| 3. Remember the provision of installation everything hoses on the valve. Not to mix them at installation, mark each of hoses and branch pipes at removal. |
| 4. Release collars (if are established) and disconnect hoses from the valve. |
| 5. Remove the valve from a fixing arm and get it from a motive compartment. |
| 6. Installation is carried out upside-down removals. At installation check correctness of connection of hoses. |
| 7. If the valve does not work as it was expected, so it is faulty, and it needs to be replaced. |