Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
3.1. 1,4 and 1,6 liters petrol engine
3.2. 2,0 liters petrol engine
3.2.1. Types of repair of the engine without dismantle from the car
3.2.1.1. Specifications
3.2.1.2. Check of a compression in engine cylinders
3.2.1.3. Order of installation of the piston of the 1st cylinder in compression step VMT
3.2.1.4. Cover of a head of the block of cylinders
3.2.1.5. Crankshaft pulley
3.2.1.6. Cover of the chain drive of cam-shafts
3.2.1.7. Chain of the drive of cam-shafts
3.2.1.8. Natyazhitel of a chain, uspokoitel and asterisks of the drive
3.2.1.9. Cam-shafts
3.2.1.10. Levers of the drive of valves and hydraulic regulators
3.2.1.11. Head of cylinders
3.2.1.12. Oil pallet
3.2.1.13. Oil pump
3.2.1.14. Oil cooler
3.2.1.15. Crankshaft epiploons
3.2.1.16. Flywheel (or drive plate of the hydrotransformer)
3.2.1.17. Details of a suspension bracket of the power unit
3.2.2. Dismantle and capital repairs of the engine
3.3. Diesel engine
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 


3-2-1-5-shkiv-kolenvala.html

3.2.1.5. Crankshaft pulley


See subsection 3.1.1.5.

If the pulley does not give in to removal because of dense landing on a crankshaft sock, then it is possible to use a stripper. For fastening of a stripper carving openings are provided in a pulley.

3.2.1.4. Cover of a head of the block of cylinders
3.2.1.6. Cover of the chain drive of cam-shafts