Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
6.1. Carburetor engines
6.1.1. Specifications
6.1.2. Air filter
6.1.3. Air stream temperature regulator
6.1.4. Fuel pump
6.1.5. Fuel level sensor
6.1.6. Fuel tank
6.1.7. Cable of the drive of a butterfly valve
6.1.8. Pedal of management of a butterfly valve
6.1.9. Fuel
6.1.10. Carburetor Removal and installation of the carburetor Diagnostics, dismantling and adjustment of the carburetor
6.1.11. Sensors and valves of the carburetor
6.1.12. The soaking-up collector
6.1.13. Final collector
6.1.14. Exhaust system
6.2. Engines with system of injection of fuel
6.3. System of food / production of the fulfilled gases
6.4. System of decrease in toxicity of the fulfilled gases
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment

6-1-10-1-snyatie-i-ustanovka-karbyuratora.html Removal and installation of the carburetor


1. Disconnect the battery from weight and partially merge cooling liquid.
2. Remove the air filter.
3. Disconnect a cable of a butterfly valve.
4. Disconnect sockets of conducting of the carburetor.
5. Disconnect and muffle a fuel hose (the arrow specified a collar).
6. Designate all hoses and disconnect them from the carburetor.
7. Turn off 4 bolts and remove the carburetor, remove a heat insulator or the heater (on cars with converter).
8. Muffle an opening in a collector.


1. Installation is carried out upside-down.
2. Before installation check purity of the interfaced surfaces of a collector and the carburetor.
3. Adjust a cable of a butterfly valve.
4. Add liquid.
5. Check and if necessary adjust turns of idling and quality of mix.

6.1.10. Carburetor Diagnostics, dismantling and adjustment of the carburetor