Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
	1. Maintenance instruction
	2. Maintenance
	3. Engines
	4. Cooling system
	5. System of heating and ventilation
	6. Fuel and exhaust system
		6.1. Carburetor engines
		6.2. Engines with system of injection of fuel
			6.2.1. Specifications
			6.2.2. Air filter
			6.2.3. Cable of the drive of a butterfly valve
			6.2.4. Pedal of management of a butterfly valve
			6.2.5. Fuel
			6.2.6. System of injection of fuel
			6.2.7. Decompression of fuel system
			6.2.8. Fuel pump
			6.2.9. Fuel level sensor
			6.2.10. Fuel tank
			6.2.11. System of injection of fuel
			6.2.12. Case of a butterfly valve
			6.2.13. Units of system of injection of fuel
			6.2.14. The soaking-up collector
			6.2.15. Final collector
			6.2.16. Exhaust system
		6.3. System of food / production of the fulfilled gases
		6.4. System of decrease in toxicity of the fulfilled gases
	7. System of launch of the engine
	8. Coupling
	9. Transmissions
	10. Half shafts
	11. Brakes
	12. Suspension brackets and steering
	13. Body
	14. Electric equipment

6-2-14-vsasyvayushhijj-kollektor.html

6.2.14. The soaking-up collector

Removal

PERFORMANCE ORDER

1. Merge a part cooling liquid.
2. Perform the operations described in subitem 1-6 of subsection 6.2.12.
3. Disconnect all details from the gate case.
4. Disconnect all hoses from a collector, previously having designated them.
	5. Disconnect a recirculation tube from a collector (the arrow specified a recirculation tube union nut).
	6. Disconnect sockets from nozzles and from the sensor of temperature of cooling liquid, remove wires of connection with weight (shooters specified screws of fastening of plugs of connections with weight in the right part of a collector).
7. Remove a collector rack.
8. Execute a decompression of fuel system and disconnect fuel hoses from the fuel distributor, immediately muffle hoses.
	9. Make sure that all wires and hoses are disconnected, turn off nuts and bolts. working in the return sequence.
10. Remove a collector and laying.

Installation

PERFORMANCE ORDER

1. Installation is carried out upside-down.
2. Before assembly replace laying, having carefully cleared the demountable planes.
3. Track correctness of connection of hoses and wires.
	4. Tighten nuts and bolts in the specified sequence.