Service of Nissan Sunny from 1991 to 1997 release in n-14 body.
1. Maintenance instruction
2. Maintenance
3. Engines
4. Cooling system
5. System of heating and ventilation
6. Fuel and exhaust system
6.1. Carburetor engines
6.2. Engines with system of injection of fuel
6.2.1. Specifications
6.2.2. Air filter
6.2.3. Cable of the drive of a butterfly valve
6.2.4. Pedal of management of a butterfly valve
6.2.5. Fuel
6.2.6. System of injection of fuel
6.2.7. Decompression of fuel system
6.2.8. Fuel pump
6.2.9. Fuel level sensor
6.2.10. Fuel tank
6.2.11. System of injection of fuel
6.2.12. Case of a butterfly valve
6.2.13. Units of system of injection of fuel
6.2.14. The soaking-up collector
6.2.15. Final collector
6.2.16. Exhaust system
6.3. System of food / production of the fulfilled gases
6.4. System of decrease in toxicity of the fulfilled gases
7. System of launch of the engine
8. Coupling
9. Transmissions
10. Half shafts
11. Brakes
12. Suspension brackets and steering
13. Body
14. Electric equipment
 







6-2-9-datchik-urovnya-topliva.html

6.2.9. Fuel level sensor

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove a pillow of a back seat (see subsection 13.23).
3. Unscrew screws two bolts and get a viewing cover.
4. Disconnect the socket of conducting from the sensor and attach to a body an adhesive tape.
5. Depressurize fuel system, designate, disconnect and muffle fuel hoses in the top part of the sensor.
6. Designate position of the sensor (if there is an arrow, then it has to be turned on the car course forward).
7. Turn off a cap nut easy blows to the screw-driver rested against nut vents.
8. On a part of cars for removal of the sensor it is necessary to turn off bolts.
9. Carefully lift the sensor, disconnect in a tank the pump from a bracket, having pressed on a bracket, and get the sensor assembled with the pump.
10. Remove laying.
11. Disconnect a hose in the lower part and separate the pump from the sensor.
12. Wash out the filter and attentively examine. At a contamination or damages replace the filter.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down.
2. Replace a sealing ring, reliably fix the pump, before assembly combine tags on the sensor and a tank.
3. Be convinced of reliability and correctness of accession of all hoses.


6.2.8. Fuel pump

6.2.10. Fuel tank